This makeovers walkthrough stays in the order the work happens.
We don’t want the exterior of your home to feel left out of #ShutTheFrontDoorDIY week — doors of all sizes, shapes, and colors deserve to be memorable! Larissa is here with an solid garage door update, and don’t forget to come tell us a joke for a chance to win, plus link up your projects here.
Spring is in the air and it’s time to add some curb appeal! I’m Larissa from Prodigal Pieces, where Handmade is where it’s at. I don’t know about you, but I’m beyond anxious to get outside once springtime arrives to tackle home projects that have been brewing all winter. If you want to add instant curb appeal to your builder grade garage door, then this faux wood carriage door walkthrough is for you.
It has long since been my husband’s and my desire to give the exterior of our home a long overdue makeover. When we originally purchased our house we didn’t have a garage, but a carport with lattice as a wall on the one side. A few years ago we walled in the garage and added a builder grade garage door with carriage windows.
That suited us just fine and matched our scheme, but once we got to work adding a new color and stone veneer, that BIG white door just didn’t suit the rustic feel we were after. Here it is in its prep mode.
I wanted some pizzazz, some curb appeal, some I-don’t-look-like-I-came-from-the-big-tool-store-type attention. Mind you this was a vast improvement over no garage door which showcased our auto loveliness.
Since it is the norm for me to add texture to the pieces I paint with glazing for my shop, one day I thought to myself, “Why not the garage door?” So off I went to create a faux wood garage door.
Luckily our custom garage door we chose a few years ago already had a faux wood grain inlaid to the panels. So with some paint, I went to work and made our garage door look like this…
Want to give it a try? I’ll show you how.
Handmade Faux Wood Carriage Door
- burnt orange, caramel flat exterior paint – the paint I used was a seconds paint from Home Depot called Caramel Swirl. Since this is your base, you don’t have to be exact, but in a similar color family.
- dark chocolate, brown flat exterior paint – again, another seconds can for me, but just pick a deep contrasting brown.
- cotton rags (old t-shirts work the best)
- gloves
- paint brush (& artists brush if needed for windows)
First, check the back side of your garage door for a label that will give you instructions on how to prepare your garage door for painting. If no label, just make sure to fully clean the surface of dirt and debris. Also, remember I already had a wood grain design on my door…this could be done on a flat surface, but would take different steps to get the desired effect.
In the above photo, I’m showing that the bottom three panels are second coated with the top still needing a second coat. My neighbor’s little boy walked by and said, “I like your orange garage door!”
Ummm…yes it was orange, and yes my neighbors thought I was going to leave it like that. Gotta love neighbors…can I hear an amen?
Using an artist’s brush to get to the fine details helped make it easier to get around those windows. I’m also not the type to use tape to mark it off with painters tape, but you could do that if you like. I worked on a paint crew and have learned the nuisances of painters tape, and that a steady hand prevents you from needing it.
Make sure you’re applying your coats in low heat sunlight and try to avoid the hottest part of the day. The curing will go much smoother in a cooler setting. We have a southern facing garage and I had to make sure to do it early in the day before the paint would bake.
On to the fun part….adding the depth. I don’t believe in buying clearly-expensive glazing, I just make my own. Glazing is really just paint with an additive to lengthen the dry-time of the product, and I’ve just learned to work around quickly. So buy a dark glaze if you want to “buy” some more time.
As far as mixing my own, I’ve had several questions as to the amount of water I add to the paint. I don’t have exact measurements, but I took about 2 cups paint and mixed in roughly 2 tablespons water – just enough to give it flow and the consistency of milk. If it’s too thick add tiny amounts more of water, and if too runny, just add more paint.
Okay, so you’ll need that homemade glazing you made, some cotton scrap cloths (t-shirts), and a paint brush. The technique is direct, but takes a bit of time.
Apply the glaze using a fully loaded brush and work in small areas at a time. For me, I worked in one panel at a time.
After covering one panel, grab your cotton rag and then lightly wipe the glazing off. You’ll be leaving some of the glaze behind to fill the grainy texture, giving it the wood grain effect.
Here is my partial finished door. Again, the neighbors are peering out their windows wondering what in the world I was doing. The entire time I’m doing this I’m singing to myself John Denver’s song…”country road, take me home, to the place where I belong…”
My heart is in the country!
All it takes is only one coat of glazing, the garage door is finished and just needs a couple of days to cure.
Since a rustic look was what we were going for, we also added some carriage door hardware. You can find it at any home improvement store and comes in different variations.
I just love how it came out. A few mistakes I made was trying to touch up some spots – better left alone. ahem. But…I learned and am so glad I took this project on.
Now the neighbors are oohing and aahing and wanting theirs done too! ha! I love it.
Got questions? Please feel free to ask and I’d love to see yours if you give it a try!
If you like this post, then you’ll also enjoy these rustic Handmade projects:
Coming up in #ShutTheFrontDoorDIY:
(be sure to subscribe by RSS or email to get updates for every post of Shut The Front Door Handmade week)
How to Paint Cabinet Doors
