The steps below follow the order of the work for this furniture project.
Make your own Handmade Tall Wooden Planter with these direct to follow building plans. A pair of tall wooden planters will look great and add curb appeal around your front door or garage, and it costs much less to build it yourself!
Add more curb appeal by building a trellis planter, cedar monogram letter planter, or straightforward Handmade custom window boxes.
Bonjour mes amis! As a Handmade blogger, I am constantly looking for inspiration for my next project. Last year I created this memorable planter based upon some that I saw at Versailles. I loved them when I saw them and I’ve loved having mine own pair here at home.
The hubs actually commented today how well they’ve held up (we had one of the hottest summers last year and one of the wettest springs this year so it’s had to deal with the worst of the worst for a wood product). When I left for our vacation in June, I knew I wanted to find something solid to build for Cass and her Bekob crew. Our first stop was in Paris and while heading to one of my go-to cafes, I saw this:
Isn’t it solid!!!!???!! This beauty is huge, this tall wood planters is towering at 3 feet tall! It really made a statement at the entrance of the uber-luxe hotel and I knew instantly this would be the well fitted project for Cass! But, how do you make a tall wooden planter? Well I’m here with the plans for what I’m calling the Vive la France Planter!
This post contains affiliate links. Learn more and read our full disclosure policy here.
How to Build a Tall Wooden Planter walkthrough
Materials
- (10) 5/8″ x 3 1/2″ x 72″ Dog Ear Fence Pickets (cedar fence picket)
- (7) 1″ x 2″ x 8′ Furring boards
- (1) 3/4″ x 2′ x 4′ Red Oak Plywood Panel
- (1) 1, 3 or 5 gallon pot
- (160) #8 x 2 1/2″ outdoor screws in your desired finish
- (24) 1 1/4″ pocket screws
- Kreg Pocket Hole Jig
- 3/8″ drill bit
- Brad nails and nailer
- Jig saw
- Outdoor stain/sealant
Approximate cost: $50
* Note: As usual, I’ve built my planner with high end wood to ensure they will last, have good durability, and not rot out fast. The cost of just the pickets and furring strips is $20. This might be a good project for scrap wood cuts if you happen to have a decent amount of cut offs.
You can use a thinner/less expensive piece of wood on top or make the top out of furring strips that have been glued together and save between $10 – $20 off of the project.
Cut List
- (20) 5/8″ x 3 1/2″ x 18″ cedar pickets
- (20) 5/8″ x 3 1/2″ x 13.75″ cedar pickets
- (4) 1″ x 2″ x 35″ furring strips
- (6) 1″ x 2″ x 16.25″ furring strips
- (11) 1″ x 2″ x 13.75″ furring strips
- (1) 3/4″ x 18″ x 15.25″ red oak plywood panel
Building Instructions
Step 1: Drill pocket holes
Drill pocket holes at both ends of each 1″ x 2″ furring strips (both the 16.25″ and 13.75″ length pieces).
Step 2: Build side frame of planter
Attach (1) 1″ x 2″ x 16.25″ pieces to the bottom of (2) 1″ x 2″ x 35″ furring strips using 1 1/4″ pocket screws. Repeat on other side.
Step 3: Join the two sides together
Attach (1) 1″ x 2″ x 13.75″ pieces to the bottom of (4) 1″ x 2″ x 35″ furring strips using 1 1/4″ pocket screws. This will create the foundation of the planter.
**If you need to weight this planter down to avoid it being blown or knocked over, add a few more furring strips to the base to hold that future weight.
Follow the instructions below of the planter shelf on this bottom foundation. See the Q and A below for options of how to put the planter together with a weight at the bottom and what to use to weigh it down.
Step 4: Frame the Pot Shelf
Repeat the process above at either 8″ (for 1 gallon pots) or 12″ (for 3 or 5 gallon pots) from the top of the 35″ furring strips. This will create the frame for the plant support.
Step 5: Attach Furring Strip Shelf
Using a brad nailer, attach (5) 1″ x 2″ x 13.75″ furring strips, equally spaced, to the plant support.
Step 6: Add Top Frame Furring Strips
Using pocket screws, attach the remaining (2) 1″ x 2″ x 16.25″ furring strips and (2) 1″ x 2″ x 13.75″ furring strips to the top of the (4) 35″ furring strips.
Step 7: Attach Front and Back Planks
Using a brad nailer, attach the first 5/8″ x 3 1/2″ x 18″ cedar picket to the frame. Note: It should hang over approximately 5/8″ on each side of the furring strip. Repeat this process until all (10) 5/8″ x 3 1/2″ x 18″ boards are attached to the furring strips. Repeat this process on the opposite side.
Notes: If you need to weigh the planter down (depending on its final location), see my notes in the Q and A below. You may want to leave off 1/2 of the planks on the back OR side in order to add the weight once the planter is in place. And finish the planking in place.
**It may be easier to start with the side planks to make lining up the front and back longer boards easier, since they will line up with the side planks and you won’t need to measure each one.
Step 8: Attach Side Planks
Using a brad nailer, attach the first 5/8″ x 3 1/2″ x 13.75″ cedar picket to the frame. Note: It should sit between the planks on either side. Repeat this process until all (10) 5/8″ x 3 1/2″ x 13.75″ boards are attached to the furring strips. Repeat this process on the opposite side.
**It may be easier to start with these side planks to make lining up the front and back longer boards easier, since they will line up with the side planks and you wont need to measure each one.
Step 9: Countersink Drill Holes and Attach Boards with Screws
Using the 3/8″ drill bit, drill holes 1″ from the top and 1″ from the side of each plank. Drill another hole 1″ from the bottom and 1″ from the side of the plank. Repeat this on the other side of the plank. Continue doing this on all planks (there will be a total of 160 holes). After drilling the holes, attach the outdoor screws.
Step 10: Trace planter on top boards
Center your desired pot (1, 3 or 5 gallon) upside down on the 3/4″ x 18″ x 15.25″ red oak plywood decking panel and trace it.
**Remember that this top board can be pieced together with cedar planks to cut some cost.
Step 11: Cut Out Hole
Using your jig saw, cut out the traced circle.
Step 12: Attach Top
Using a brad nailer, attach the top to the planter.
Step 13: Stain Wood
If desired, stain the topper black. Cover the entire planter with Thompson’s Water Seal or any other stain/poly made for outdoor application. Place potted plant in planter and enjoy your new outdoor planters!
This project is a bit time consuming (160 screws!!!), so no need to glue! It is however, very straightforward to carry out, and will be strong and hold up to all the elements. Just think, after all of those screws are in, this planter will make quite a statement to your porch or patio. Think of the curb appeal it would add to your home to have these flanking your front door or even your garage doors.
Tall Wooden Planter Questions and Answers
Q. Dimensions of this tall planter?
Overall the dimensions of these tall planters are 18″ wide in front, 15″ deep by 3′ tall.
Q. What can you use a tall planter for?
This project is great for year round décor and curb appeal for your home.
These planters would be well fitted for a balcony or deck. Place them in the corner of your planned space, to give the deck some built in grandeur. This also would help to make an outdoor space feel more delineated and mark the edges, allowing you to divide an outdoor space beautifully.
Just outside your back door, this planter would make for a great herb garden for cooking, herbs are striking and useful! look at our other options for herb gardens here.
At Christmas time this planter can be used to decorate for the holiday. Chick out this post for options of how to style a tall planter with winter décor.
This tall wooden planters Handmade project could also make a great spot for a patio garden. The well fitted place for you to grow some vegetables this summer. To make sure your plants stay watered (vegetables can’t be forgotten or they die!) consider a self watering pot.
Q. Would this planter work with benches?
A bench placed between two of these planters would make for a private little spot to take a rest… makes me think of a Jane Austin novel!
If you built the frame with a 2×2, you could possibly even string a 4′ 2×4 from the side frame of one planter to the side frame of another planter. Then just plank the top like the sides of the planter to create a built in bench. Just be sure to sand really well to avoid splinters!
Q. What plants can you plant in a Handmade Tall Planter?
There are so many options for planting in this Handmade planter.
- An evergreen shrub would look great year round. This can be real (or check below for some great faux options.)
- A faux 4′ tall evergreen topiary (I have these on my front porch and LOVE them- not watering invovled!)
- Faux Boxwood Balls – stay with me. I have also used these in my front planters and LOVE the no watering (do you detect a theme?)
- Succulents for a modern design aesthetic (for those of us that don’t want to water every day. I think a string of pearls trailing over the side would be memorable.)
- Flowers – beautifully blooming annuals, with some spiky plant for height and some sweet potato vine for a trailing edge.
Q. Are wood planters good for plants?
The short answer is yes. Because wood is a natural material it won’t hurt your plants. Just be sure that if you are using salvaged material (like pallet wood for example) that you know there is a chance that it could have come in contact with a chemical and avoid using this to grow edible foods.
In this particular plan the plant is in a planter not in direct contact with the wood, so salvaged materials would be safe to use and still grow edible plants.
Q. What is the best wood to make planters out of?
I would recommend Cedar planks like mentioned in the building plan above. These planks are not only affordable, but also bug resistant and shouldn’t shrink significantly like treated lumber.
A soft pine will break down quickly if in a lot of direct sunlight. If you are thinking of making this from salvaged wood like pallets for example be sure that the planter is out of direct sunlight most of the day, and if possible out of the rain/sprinklers. I would store in a place where it won’t get too wet in the winter time as well to prolong the life of the build.
Depending on where you live Cyprus, and or Redwood could also be good naturally bug resistant wood choices. But keep in mind that these choices could increase the price significantly.
Q. Should I put anything at the bottom of my planter?
Depending on the final location of this planter, weighing it down may be a necessary step to avoid it being knocked over.
In order to give this planter a place to weigh it down you may need to add some furring strips to the bottom (just like you added for the planter shelf- see steps above) Add the pickets over the front and two sides, then JUST the top half of the back, leaving the back open on the bottom.
Put in place and then fill the bottom with rocks, bricks, or any heavy trash you have lying around (heavy is the keyword (if it fits you could even fill a five gallon bucket with water and seal it shut and place that at the bottom) Then cover the back with the planks. using only screws to attach he wood so they can be removed if you need to move the planter.
——————————–
More planters you can build:
- rustic farmhouse pallet wood large planters
- planter box house number sign
- Handmade wood planter stands
- straightforward custom sized cement planters
- plus 25 more Handmade planter tutorials here
