Bekob

Kitchens, baths, furniture, and the yard.

Handmade Wine Bottle Bird Feeder

Gardens

Handmade Wine Bottle Bird Feeder

The steps below follow the order of the work for this gardens project.

Hey everyone, I’m Jamison from RogueEngineer.com where I publish free and awesomely cool Handmade furniture plans on a weekly basis. I don’t know where your from, but here in Savannah, GA spring has sprung! With all the birds out chirping I decided to make my own variation of the wine bottle bird feeder using some leftover cedar from another project. Follow along with this walkthrough to see how you can build one too!

Handmade Wine Bottle Bird Feed - Free walkthrough - Rogue Engineer on Bekob.com

Handmade Wine Bottle Bird Feed - Free walkthrough - Rogue Engineer 3

Handmade Wine Bottle Bird Feed - Free walkthrough - Rogue Engineer 2

How to Build a Wine Bottle Bird Feeder

open this For FREE PLANS

Required Tools

  • Miter Saw
  • Nailer
  • Jig Saw
  • Clamp
  • Tape measure
  • Pencil
  • Sander

Supplies

  • 1 x 2 x 8′ Cedar Board
  • 1 x 6 x 8′ Cedar Board (I used scrap; you really only need about 18″)
  • 1-1/4″ Brad Nails
  • Wood Glue
  • Empty Wine Bottle
  • Bird Seed

Cut List

Handmade Wine Bottle Bird Feeder - Cut List

Photo walkthrough: Building the Bird Feeder

On one of your 5 1/2″ squares with trimmed corners, center and draw a circle just larger than the wine bottle. Cut the circle out with a jigsaw.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 1

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 2

Attach one of the 11 1/4″ pieces to a trimmed corner of the piece with the circle and another trimmed square piece, using 1 1/4″ brad nails and glue. Repeat for all 4 sides.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 3

Note: Everywhere you nail you should use wood glue.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 4

Cut a 2″ circle from the center of the remaining trimmed square piece.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 5

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 6

Install the bottle support in the frame such that the mouth of the bottle is 1/2″ above the base. Nail it in place using 1 1/4″ brad nails.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 7

Nail together your trim pieces at the corners using 1 1/4″ brad nails, creating two trim squares.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 8

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 9

Nail one trim square to the top and one to the bottom of the structure.

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 10

Handmade Wine Bottle Bird Feed - Rogue Engineer - Step 11

I decided to screw two eyelets in the top and use copper wire to hang it. Now all you need to do is fill your wine bottle with bird seed, slip the feeder over it (upside down), and quickly flip it right side up to allow the seed to fall out.

Well, I hope you enjoyed this walkthrough. For sneak peeks of our upcoming projects from Rogue Engineer be sure to follow me on Facebook and Instagram.

——————————–

More outdoor projects for your yard:

bucket patio coffee table, via Bekob
wash tub patio table by A Place to Nest on Bekob
Drop-Down Reclaimed Wood Outdoor Buffet, Simply Swider featured on Bekob
Fold-Up Outdoor Buffet Table by Simply Swider on Bekob
25-inspiring-exterior-window-treatments-and-handmade-tutorials
outdoor window treatment tutorials