Handmade Toddler House Bed Frame / Playhouse Reading Nook

The steps below follow the order of the work for this project plans project.

Build a Handmade toddler house bed frame as a floor bed for your child or a playhouse reading nook. This first-time woodworking plan requires only 2×2 lumber, a saw, and a drill/driver.

Hi again, It’s Amy from Hertoolbelt with another great build project. Today’s project is a fun toddler house bed frame or playhouse frame reading nook for kids. You’ll also want to look at this twin-sized house bed frame, patio table with drink coolers, and adjustable double X console table.

Free and straightforward Handmade Playhouse Reading nook plans on Bekob.com

We found the original photo at From Scandinavia With Love and just had to make plans so you can build your own toddler floor bed or reading nook!

I really like the Scandinavian style designs, they are minimalist with high impact. This playhouse frame is direct to build, yet so versatile. Use the frame as is, or throw a sheet over it for a cute fort.

How to Build a Toddler House Bed Frame
or Playhouse Frame Reading Nook

Get the printable toddler house bed plans HERE
The playhouse frame has been sized to fit around a crib mattress, to make a comfy reading area or straightforward floor bed as your child transitions out of the crib. If you don’t have a crib mattress, toss in blankets and pillows for a cozy nook.

The printable woodworking plan includes a full materials and cut list, with step by step instructions for cutting and assembling the house bed.

**As a word of caution, remember that kids can be little monkeys. Please be sure to secure your playhouse to the floor, or up against a wall through a couple studs, with some long anchor screws, to make sure it stays in place while they play!!

How big is a toddler house bed?

Designed to fit a standard crib mattress, the overall dimensions of this toddler house bed frame are 56″ W x 31″ D x 54 1/8″ H. This size gives your child enough head clearance for comfortable sleeping and creative play without taking up too much floor space.

Handmade Toddler House Bed Frame or Playhouse Reading Nook Woodworking Plans This post contains affiliate links. Learn more and read our full disclosure policy here.

Tools needed to build the crib-size playhouse frame:

Miter saw (or miter box with saw)
Drill and drill bits (optional: countersink bit)
Measuring tape
Paint brush

Materials needed:

(approximate lumber cost $14)

toddler house bed frame printable woodworking plan
7 – 2 x 2’s x 8′ long (actual 1 1/2″ x 1 1/2″)
2 1/2″ screws
3″ screws
Paint & primer
Wood filler – optional

Tips for Assembling a Handmade Toddler House Bed

There are several basic woodworking steps for cutting lumber and assembling the house bed to fit a crib size mattress (included in full detail in the printable woodworking plan).

Rough cut the lumber to length.
Finish cut the lumber, including angles.
Drill thru holes to reduce splitting or cracking the wood.
Assemble as shown in the plans, drilling pilot holes as needed.

Then, just sand and paint or stain as desired!

Related: Keep those kiddos safe with a Handmade barn door baby gate and dutch door for stairs.

Drilling A Hole In A Board, Pilot Holes Vs Thru Holes Bekob — predrilling pilot holes and using a countersink bit help prevent board from cracking or splitting // image from our straightforward wood shutters walkthrough

What is the difference between a pilot hole and a thru hole?

Both a pilot hole and thru hole can be used to prevent splitting or cracking boards on a project like this. (This is especially important when using inexpensive or soft lumber like pine or whitewood that is common at most hardware and lumber stores.)

A pilot hole is a hole drilled where a screw will be used to attach two boards together. A pilot hole is a bit smaller than a thru hole, even when using the same size screw. To determine pilot hole size, the drill bit should be about the size of the screw shank, smaller than the threads. This allows the screw to grab the wood for a secure hole without the extra driving force required that may split the board.

A thru hole allows a screw to pass through the board and attach securely to the adjacent board. A thru hole should be approximately the same diameter as your screw threads — larger than a pilot hole because the screw is being used to hold the board in place when the screw threads grab the adjacent board (and pilot hole) rather than grabbing the wood of the first board to hold.

Tip: When drilling the thru holes, try to stagger the hole placement when 1 board is drilled in multiple directions, so the screws won’t hit each other.

For a really nice finished look, you can use a countersink drill bit on either a pilot hole or a thru hole. The countersink bit is shaped kind of like a child’s top, and will remove an extra bit of wood for the screw head to sink flush with the wood (“countersunk”) without risk of cracking or splitting the board.

How to Finish a Wood Toddler House Bed

If desired, fill the screw holes and cracks with wood filler. When the wood filler is dry, sand smooth. Prime the wood with paint primer and allow to dry. Paint the playhouse frame with your go-to color and allow to fully dry.

Enjoy the new playhouse!