Turning a Glass Vase Into a Lamp walkthrough

The steps below follow the order of the work for this decor project.

Turning a Glass Vase Into a Lamp walkthrough by Aaron

Hey y’all! I’m Aaron and I blog at The Thrifty Abode. I’m a wife, mother, and teacher and I blog about my attempts at creating a striking home on a small modest-cost. I’m pretty much a newbie blogger so I’m clearly excited to be guesting on such a popular and established blog! Thanks for having me Cassity!

 

I absolutely love finding a bargain or a knock-off that looks exactly like an item from Pottery Barn, West Elm, or ______________(fill in your go-to inspiring, but out of modest-cost store here). What’s even better is creating the item from things I already own and a couple things I found at a hardware store.

That’s exactly what I did with my glass jug and $18 I spent at Lowe’s.

I turned this:

 Into this:

I’d been working on refreshing my living room and looking for a cheaper version of one of these lamps.

via

via

In all of my searching I never found one. I’d had the glass jug pictured above for years and I started wondering how difficult it could be to turn it into a lamp. The only difference between my $15 jug and the $100 + lamps was a hole and some wiring.

I knew that bottle lamp kits were sold at Lowe’s so all I had to do was figure out how to put a hole in my jug. With a little research I found out that I needed a ceramic cutting drill bit. I made a trip to Lowe’s and picked up the kit and bit (I got the 5/16″) for $18.

via

via

I got my supplies home and got drilling! I put some tape on the jug because I was nervous about it cracking. Thank goodness it didn’t crack, but it did take about five minutes of drilling to make a hole big enough for the cord to fit. After the hole was made, all I had to do was follow the instructions on the lamp kit packaging (it’s surprisingly straightforward). I only had to make one adjustment. The stoppers that are included in the kit were all too small for the opening of my jug, so I used a little hot glue to create a seal so the stopper would fit. The hot glue worked great and you can’t even tell it’s there. Here’s the finished product again:

And here’s what it cost me:

New money spent:

• drill bit: $8
• lamp kit: $10

$18 is pretty good for a solid PB or West Elm knock-off.

Here’s what it would cost if all the parts had to be bought new:

• bit and kit: $18
• jug: $10-$15 (The shelves of HomeGoods, T.J. Maxx, and Marshall’s are littered with glass jug thingies. Mine was $15, but I’ve seen ones the same size for $10.)
• drum shade: $15 from Wal-Mart’s Canopy line
• lamp harp and prongs: $4 (you may need these depending on what kind of shade you have. These are also sold at Lowe’s)

$47-$52 is still about half of what it would cost to buy the Pottery Barn Eva lamp.

I hope you’ll hop over to The Thrifty Abode and look at my other thrifty adventures in decorating.